Enphase M215 Service Manual download pdf (Page 15)

M215 Installation and Operation

Step 2: Connect the Envoy

The Envoy operates between the Enphase Microinverters and the Enphase Enlighten® web-based

monitoring and analysis software. The Envoy collects energy and performance data from the

microinverters over on-site AC power lines. It then forwards that data to Enlighten, via the Internet, for

statistical reporting. The Envoy is capable of monitoring up to 600 Enphase Microinverters.

a. Connect the Envoy to power and Internet according to the Envoy Quick Install Guide.

b. Wait for the “+Web” indication on the Envoy’s LCD screen.

c. Leave the Envoy running while you install the microinverters so that any required Envoy

software upgrade completes.

BEST PRACTICE: When powered up and connected for the first time, the Envoy may

retrieve an automatic upgrade from Enphase. Because this upgrade may take up to 20

minutes, connect the Envoy first at the site (connect to both AC power and the broadband

router) so that it performs the upgrade well before the solar module installation is complete.

WARNING! Do not remove power from the Envoy if the LCD displays:

“Upgrading. . . Do Not Unplug.”

broadband router

Envoy

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

No comments

Enphase M215 Service Manual Page 15